Quad GbE PCI-X Host Bus Adapter PRODUCT BRIEF
XLR Processor® PCI-X Host Bus Adapter Card
Features and Highlights
The Quad GbE PCI-X Host Bus Adapter board is a standard PCI-X form factor board that ships with an XLR532 Processor installed. The board facilitates communication with key XLR Processor® interfaces such as DDR2 memory, PCI-X, and Quad 10/100/1000Mbps Ethernet MACs.
Since all members of the XLR5xx processor family are pin-compatible, the same board layout can be used to accommodate other processors in the XLR family.
Firmware
A complete set of firmware, OS and debug tools is provided to enable a complete test environment.
XLR Processor
The XLR5xx Processor family is a cost-effective, single-chip solution providing the key building block for next-generation, scalable system solutions. It combines the power of an innovative Multi-Threaded architecture, the flexibility of extensive industry-standard media interfaces and the simplicity of a leading edge, general purpose MIPS64 ISA-compliant architecture.
Quad GbE PCI-X Host Bus Adapter
Board Specifications
Contains an XLR532 Processor*
Leverages
XLR-Enhanced Processor Cores
- Enhanced 64-bit MIPS64TM ISA with instruction set extensions
- Each core 4-way fine-grain multithreaded
- Flexible thread scheduling
Network Acceleration Features
- Line speed Parser / Packet Director for deep packet inspection
- Line-rate, standards-compliant IPSEC and SSL acceleration
- Quad 10/100/1000 Mbps Base-T ports
- Supports IPv4 / IPv6
- TCP/IP Acceleration Hardware
- Layer 4-7 inspection / offload capable
- Packet Distribution Engine and order sequencing hardware per network interface
Security Acceleration
- Up to 10 Gbps bulk encryption
- Switched Gigabit Ethernet topology
- AES (128, 192, 256), DES/3DES, ARC4
- MD5, SHA-1, SHA-256 (All HMAC)
- Pre-shared key or certificate authentication
- Complies with RFC2401-IP security architecture, RFC2402 IP authentication, RFC2403 HMAC-MD5, RFC2404 HMAC-SHA-1, RFC2405 DES-CBC cipher algorithm, RFC2406 IP encryption, RFC2409 IKE
Main Memory - 64/128/256/512MB Options
- Industry standard DDR-II memory
- Single or dual controller supported
- x36 and x72 data path widths supported
- ECC fully supported for SBC and double bit non-correctable errors
|
 |
Network Connectivity
- Quad 10/100/1000 Base-T Ethernet
- Copper, CAT5 UTP with RJ45 connectors (up to 100 meters)
- IEEE 802.3, 802.3u, 802.3ab compliant
- IEEE 802.1Q VLAN Tagging, both insertion and removal
- 16K Jumbo Frame support
- Two Link/Activity LEDs per port
- Full duplex line rate transfer
System Interface
- 64-bit 133 MHz PCI-X 1.0a system bus interface
- Backward compatible with 32/64-bit, 33/66MHz PCI
- Bus conforms to PCI local bus specification revision 2.2,
PCI-X specification 1.0a, and PCI bus power management interface specification revision 1.1.
Boot Memory
- Up to 32MB on-board flash
- Full remote boot capability
Software Support
- Supports Linux 2.6, MontaVista Linux, and WindRiver VxWorks operating systems
- Open source Linux for all I/Os (1GE, 10GE, peripherals)
- Open SSL source libraries
Power Management
- On-Chip Thermal Sensor
- Software programmable clock throttling
Physical Dimensions
|
*The board layout supports all pin-compatible members of the XLR5xx family, including the XLR516 and XLR508 processors.
| Ordering Part Number (OPN)
|
Evaluation Kit Name |
| XLR5PCIX-IA 05 |
Quad GbE PCI-X Host Bus Adapter |
Quad GbE PCI-X Host Bus Adapter